شركة SINOYQX تُطلق رغوة الامتصاص اللاصقة YQX-U

SINOYQX™ Introduces YQX-U Precision Adhesive Absorption Foam for Automotive and Automated Manufacturing

New 12 kg/m³ open-cell melamine foam series targets adhesive residue management, robotic dispensing and precision assembly applications with customizable die-cut foam pads.

October 12, 2026 | Product News | SINOYQX™

As global manufacturing continues to advance toward higher levels of automation, precision and production efficiency, the management of excess adhesives and liquid residues has become an increasingly important consideration in industrial assembly processes.

Structural adhesives, sealants, thermal interface materials and other industrial liquids are widely used in automotive component manufacturing, electric vehicle battery assembly, robotic dispensing and precision electronics production.

However, automated dispensing operations may still generate localized adhesive overflow, nozzle residues and contamination around manufacturing fixtures and equipment.

To address these emerging application requirements, SINOYQX™ introduces YQX-U Precision Adhesive Absorption Foam, a new functional melamine foam series developed for industrial adhesive management and precision manufacturing applications.

مرتكز على 12 kg/m³ open-cell رغوة الميلامين, YQX-U is designed for conversion into precision die-cut absorbent pads, customized foam sheets and application-specific industrial components.

The introduction of YQX-U expands SINOYQX’s melamine foam portfolio beyond traditional acoustic absorption, thermal insulation and cleaning applications into Industrial Adhesive Management Materials.

1. Adhesive Residue Management Challenges in Precision Manufacturing

Automated adhesive dispensing systems are widely used across modern manufacturing industries.

These systems apply controlled amounts of adhesives to specific locations according to programmed dispensing parameters.

Nevertheless, changes in adhesive viscosity, dispensing pressure, equipment movement, component geometry and environmental conditions can lead to excess adhesive or localized residue.

تشمل التحديات الشائعة في التصنيع ما يلي:

• Dispensing nozzle residues: Small amounts of adhesive may remain on nozzle tips after dispensing cycles.
• Fixture contamination: Excess adhesive can accumulate on positioning fixtures, equipment supports or surrounding surfaces.
• فيض اللاصق: Structural adhesives, sealants and thermal interface materials may extend beyond intended application areas.
• Manual cleaning requirements: Some manufacturing processes require periodic wiping or manual residue removal.
• صيانة المعدات: Adhesive accumulation may increase cleaning requirements and maintenance activity.

For automated production lines, controlling localized adhesive residue without disrupting normal manufacturing operations can be an important process consideration.

Conventional materials used for industrial wiping and liquid collection include nonwoven fabrics, polyurethane foams and other porous absorbent materials.

However, these materials differ in pore structure, liquid compatibility, dimensional characteristics, particle release and converting capabilities.

SINOYQX™ YQX-U has been introduced as an additional material option for manufacturers evaluating customized adhesive absorption and residue management components.

2. How Does YQX-U Precision Adhesive Absorption Foam Work?

YQX-U is based on an خلية مفتوحة رغوة الميلامين بناء consisting of an interconnected three-dimensional porous network.

Unlike conventional closed-cell foams, open-cell materials contain interconnected pathways through which compatible liquids may penetrate.

When a liquid contacts the foam and adequately wets its internal surfaces, capillary forces can contribute to the movement of liquid into the porous structure.

This mechanism is commonly described as:

Microcellular Capillary Absorption

The potential advantages of this structure for industrial process applications include:

Interconnected Open-Cell Network

The porous structure provides internal pathways for liquid penetration and distribution, making the material a candidate for localized liquid absorption applications.

Lightweight Material Construction

With a nominal density of 12 kg/m³, YQX-U provides a lightweight material platform for the development of selected industrial process components.

Precision Thickness and Shape Customization

The foam can be evaluated for conversion into thin pads, customized sheets and die-cut components according to equipment dimensions and installation requirements.

Replaceable Process Components

For applications requiring periodic adhesive residue management, customized foam pads may be designed as removable or replaceable consumable components.

Important technical consideration: The absorption performance of melamine foam depends on the liquid being handled.

Adhesive viscosity, surface tension, wettability, curing behavior and chemical composition may affect absorption capacity, absorption rate and material compatibility.

Performance with epoxy adhesives, polyurethane adhesives, silicone sealants, water-based adhesives and other industrial liquids must therefore be evaluated under actual operating conditions.

3. Automotive Component Manufacturing: A Key Application Development Market

Automotive manufacturing is one of the primary target markets for the YQX-U series.

Modern automotive assembly processes use automated adhesive dispensing in steering systems, electric drive components, lighting assemblies, electrical systems and other precision mechanical components.

Common adhesive materials include:

• المواد اللاصقة الهيكلية
• مواد لاصقة إيبوكسي
• مواد لاصقة من مادة البولي يوريثين
• مانعات التسرب الصناعية
• لاصقات السيليكون RTV

During certain assembly operations, excess adhesive may contact manufacturing fixtures or accumulate around dispensing equipment.

For these applications, YQX-U can be converted into customized foam pads for evaluation in several process areas.

Localized Residue Collection Near Dispensing Equipment

Precision-cut foam pads may be positioned in suitable, engineering-approved locations near dispensing equipment to evaluate their ability to collect compatible excess liquids.

Localized Fixture Protection

Custom foam components may be designed according to fixture dimensions to help manage adhesive contact in selected areas.

Replaceable Industrial Process Pads

YQX-U can be evaluated for use as a replaceable process material within automated assembly equipment.

For automotive industry applications, material selection should consider adhesive compatibility, absorption performance, particle release, dimensional stability and operating conditions.

Application-specific validation is recommended before production-line integration.

4. EV Battery Manufacturing: Potential Applications in Adhesive and Sealant Management

Electric vehicle battery modules and battery pack manufacturing frequently involve thermal interface materials, structural adhesives, sealants and potting compounds.

As battery systems become increasingly integrated, accurate material dispensing and localized contamination control remain important manufacturing considerations.

Potential process challenges include:

• Excess thermal interface materials around selected dispensing locations.
• Localized sealant residue on manufacturing fixtures.
• Uncured adhesive contamination on equipment surfaces.
• Liquid accumulation near automated dispensing stations.

For these applications, SINOYQX™ can evaluate customized YQX-U foam pads and thin sheets as possible process auxiliary components.

Initial development focuses on 2 mm, 3 mm and 5 mm thickness options, subject to manufacturing confirmation.

Because battery manufacturing involves specific cleanliness, electrical and production reliability requirements, material suitability must be confirmed through appropriate testing before use.

5. Robotic Dispensing Equipment: Developing Replaceable Adhesive Residue Pads

Industrial robotic dispensing systems are often designed for repeated and continuous dispensing cycles.

During operation, residual adhesive may accumulate around dispensing nozzle tips.

Some systems therefore incorporate dedicated cleaning or maintenance mechanisms.

For this application, SINOYQX™ is exploring the development of YQX-U Adhesive Nozzle Cleaning Pads as customized components for adhesive residue management.

تشمل أشكال المنتجات المحتملة ما يلي:

• Square and circular precision die-cut foam pads.
• Small customized absorbent foam blocks.
• Replaceable nozzle-contact pads.
• Application-specific foam components for automated dispensing fixtures.

The suitability of contact-based nozzle cleaning must be evaluated according to nozzle geometry, contact pressure, adhesive curing behavior, particle release and potential residue transfer.

SINOYQX welcomes technical collaboration with robotic dispensing equipment manufacturers, automation system integrators and industrial machinery suppliers to explore suitable material configurations.

6. YQX-U Precision Adhesive Absorption Foam: Technical Specifications

The YQX-U series is developed around 12 kg/m³ open-cell رغوة الميلامين, with a focus on precision converting and customized industrial components.

The initial product development specifications are outlined below.

المذكرة التقنية: The listed thicknesses and product forms represent the initial development and supply plan. Final dimensions, tolerances, available configurations and other specifications are subject to technical confirmation.

Adhesive absorption capacity, absorption rate, chemical compatibility, particle release and long-term performance require application-specific testing.

7. Why Customized Absorbent Foam Pads Instead of Conventional Foam Rolls?

Unlike large-area acoustic insulation or thermal insulation applications, industrial adhesive management often requires materials with precisely defined dimensions, installation positions and replacement procedures.

For example, an automated dispensing station may require only a small, specially shaped absorbent pad rather than a continuous foam roll.

For this reason, the YQX-U series focuses primarily on:

Custom Industrial Absorbent Components Rather Than Standard Foam Rolls.

Depending on customer drawings and application requirements, SINOYQX can evaluate:

• Custom-sized rectangular absorbent pads.
• Precision die-cut foam components.
• Thin foam sheets for further conversion.
• Specialized shapes for industrial fixtures and equipment.

Foam rolls may also be considered for industrial converters or equipment manufacturers requiring continuous material supply.

This application-oriented approach allows industrial customers to select formats suited to their manufacturing processes rather than adapting equipment around conventional bulk foam products.

8. YQX-U Melamine Foam vs. Conventional Industrial Absorbent Materials

Common materials used for industrial wiping, absorption and process protection include polyurethane foam, polyethylene foam, nonwoven materials and other engineered porous structures.

Each material offers different characteristics depending on its composition and manufacturing process.

رغوة البولي يوريثان (رغوة PU)

PU foams are available in multiple formulations and pore structures, with properties tailored for cushioning, liquid absorption and industrial cleaning applications.

رغوة البولي إيثيلين (رغوة البولي إيثيلين)

Conventional closed-cell PE foam is commonly used for cushioning, sealing and surface protection, while specially engineered PE-based products may support other applications.

مواد غير منسوجة

Nonwoven fabrics can be designed for wiping, liquid collection and filtration depending on their fiber composition and manufacturing process.

رغوة الميلامين

Open-cell melamine foam provides a lightweight porous structure and can be evaluated for precision-converted components used in localized liquid management.

However, absorption performance cannot be reliably ranked based on material category alone.

Industrial material selection should consider the specific adhesive, contact conditions, absorption requirements, cleanliness constraints and total operating costs.

YQX-U is not positioned as a universal replacement for existing industrial absorbent materials, but as an additional engineered foam option for suitable applications.

9. Technical Collaboration and Sample Evaluation

SINOYQX™ continues to expand the application potential of melamine foam through materials development, customized converting and industrial collaboration.

The introduction of YQX-U represents a new development direction in specialized industrial process materials.

SINOYQX welcomes inquiries from:

• Automotive OEMs and Tier 1 Suppliers
• EV Battery Module and PACK Manufacturers
• Robotic Adhesive Dispensing Equipment Manufacturers
• Industrial Automation System Integrators
• Precision Foam Converters
• Electronics and Precision Assembly Manufacturers

Customers interested in evaluating YQX-U are encouraged to provide information about the adhesive type, operating temperature, required dimensions, contact conditions and estimated consumption.

This information can help determine suitable sample configurations and the technical evaluations required for each application.

SINOYQX™ YQX-U Precision Adhesive Absorption Foam

Engineered Open-Cell Melamine Foam for Industrial Adhesive Management and Precision Manufacturing.

الموقع https://www.sinoyqx.com/

البريد الإلكتروني: [email protected]

SINOYQX™ — Engineered Melamine Foam for Advanced Industrial Applications.

الأسئلة الأكثر شيوعًا (FAQ)

What is precision adhesive absorption foam?

Precision adhesive absorption foam is a porous functional material developed for localized adhesive residue collection and liquid management in industrial manufacturing. SINOYQX YQX-U uses 12 kg/m³ open-cell melamine foam and can be converted into custom absorbent pads, sheets and die-cut components.

Can melamine foam absorb industrial adhesives?

Open-cell melamine foam provides interconnected pores that may absorb compatible liquids through capillary action. However, performance varies depending on adhesive viscosity, wettability, chemistry and curing behavior. Testing with the actual adhesive is necessary.

What is the density of SINOYQX YQX-U foam?

YQX-U has a nominal density of 12 kg/m³. The series initially focuses on 2 mm, 3 mm and 5 mm thickness options for customized industrial components.

Can YQX-U be used in automotive adhesive dispensing systems?

YQX-U is being developed for evaluation in automotive adhesive dispensing and precision assembly applications, including localized residue collection, fixture protection and replaceable absorbent pads. Actual suitability depends on the dispensing process and must be validated.

Can YQX-U foam be die-cut into custom shapes?

SINOYQX can evaluate precision cutting and die-cutting options based on customer drawings, requested dimensions, material thickness and manufacturing feasibility. Final tolerances and available configurations require confirmation.

Is YQX-U suitable for EV battery pack manufacturing?

YQX-U may be evaluated as a process auxiliary material for localized adhesive or sealant residue management in selected EV battery manufacturing operations. Chemical compatibility, cleanliness, electrical and other relevant requirements must be assessed before use.

How is YQX-U different from ordinary melamine cleaning foam?

Although both use melamine foam as a base material, YQX-U is positioned for industrial adhesive management and automated manufacturing. It focuses on a nominal density of 12 kg/m³, customized dimensions, precision converting and application-specific technical evaluation rather than consumer cleaning.

How can I request YQX-U samples?

Contact SINOYQX through its official website or email with the adhesive type, required thickness, foam dimensions, operating conditions and estimated project volume. The team can review the requirements and discuss suitable sample configurations.